Spinners

photo: lt

 

 

PWM101 Light-duty Spinner

Spins standard 4" diameter silicon or ceramic substrates or smaller diameters or pieces, at speeds up to 4000 rpm. Due to the absence of a chemical drain, foil is used to contain the extra resist. Thus, the foil must be changed after each use in order to correctly identify the resist for proper disposal.

 

photo: hv spin

 

 

PWM103 Heavy-duty Spinner

Supports a 5" x 5" substrate for spinning. A non-standard substrate can be spun with this instrument if it fits securely inside the spinning jig. Foil is used for chemical drainage and it must be changed after each use.