CAMD's Mission and Vision Statement
The J. Bennett Johnston, Sr., Center for Advanced Microstructures and Devices (CAMD), is named for the father of its congressional sponsor, Senator J. Bennett Johnston, Jr. of Louisiana.
CAMD is a synchrotron radiation research center at Louisiana State University in Baton Rouge. The mission of CAMD is to provide infrastructure for research and education in synchrotron-based science and technology. The facility was built with a $25-million grant from the U.S. Department of Energy and its operations are state-funded by LSU. The heart of the facility is a 1.3 GeV electron storage ring that was built exclusively to provide synchrotron radiation. Research in basic sciences and microfabrication is conducted by scientist and engineers from Louisiana universities, along with distinguished scientists from national and international institutions.
CAMD is the only state-funded synchrotron facility in the U.S. The spirit of the state appropriation is that LSU operate CAMD to benefit researchers in Louisiana in the areas of basic and applied sciences, and in developing technologies associated with microstructures and devices. By providing X-rays and equipment, as well as a principal part of the technological expertise, CAMD forms a nucleus for the development of strong programs in microfabrication, materials science and other targeted areas of scientific and technological exploration. This nucleus attracts scientists and engineers from Louisiana, across the U.S. and nations around the world. These individuals, along with the CAMD staff, provide the base of expertise necessary for technological development.
Electron Storage Ring
The centerpiece of the CAMD facility is a normal-conducting electron storage ring optimized for the production of soft X-rays. The machine is a low-energy-injected (200 MeV) Chasman-Green lattice designed to operate in the range of 1.2 - 1.5 GeV. The ring includes eight bending magnets with a radius of 2.928m. The dipole magnet chambers have two ports emitting > 70 mrad of synchrotron radiation each. Two straight sections are available for insertion devices, with one currently occupied by a superconducting wiggler.
Electron Storage Ring Parameters
Beam Energy (GeV) 1.3
Beam Current (mA) 200
Bending radius (meters) 2.928
Critical wavelength 7.45
Critical Energy (keV) 1.66
Beam half-life (hours) 9.5
Harmonic number 92
Radiative power (watts/mrad/mA) 0.014
Injection energy (MeV) 200
Natural emittance (m-rad) ~2x10-7
Electron-beam width (mm) ~0.6
Electron-beam height (mm) ~0.15
Superconducting Wavelength Shifter
The wiggler consists of a 3-pole superconducting magnet with a maximum field of 7 T at the central pole and 1.55 T at the side poles. The horizontal deviation of the electron beam orbit at the central pole is equal to zero due to compensation of the beam trajectory realized by the superconducting magnet together with two normal conducting correctors at 0.6 T. Therefore, the magnetic-field strength of the central pole can be set to any value between zero and its maximum with the location of the source point fixed. This allows the critical wavelength to be tuned to a particular experiment.
The multipole wiggler consists of a 15-pole superconducting magnet with a maximum field of 7.5 T at the central pole and provides X-rays to 3 beamlines. The central beamline (PX) is dedicated to diffraction studies, primarily protein crystallography, while the other two beamlines serve the X-ray absorption community (HEXAS) and the tomography/medical physics/X-ray phase contrast imaging community (Tomography).
CAMD's basic science research programs span a wide range of disciplines, including physics, chemistry, materials science and geology. Research thrusts include studies of thin-film magnetic alloys, catalysts, polymer/organic materials, and clay minerals, utilizing techniques including photoelectron spectroscopy, gas-phase photoionization and fluorescence spectroscopy, X-ray absorption spectroscopy, X-ray microspectroscopy and tomography.
VUV Beamlines/Experimental Equipment
VLSPGM, 200-1200, eV, E/ΔE up to 10,000
3-m NIM, 9-28 eV, E/ΔE ~10,000 (high E); 50,000 (low E)
5-m TGM 25-400 eV
Experimental equipment includes angle-resolved two-axis hemispherical and an Omicron EA125 analyzer on the 5-m TGM, an Omicron EA125 analyzer on the VLSPGM for both synchrotron XPS and XAS, and a high-resolution SCIENTA-200 analyzer on the NIM beamline.
X-ray Beamlines /Experimental Equipment
XAFS, 1-14 keV, ΔE = 0.5 - 3 eV
XMP, 2-14 keV, ΔE = 1 - 3 eV (or white beam)
White Light, broad-band, 700 eV<E<15 keV
Equipment available at the X-ray beamlines includes a Kirkpatrick-Baez microfocusing mirror system, 4-circle Huber goniometer, 13-element Ge and single element Si (Li) detectors and a 50 micron resolution image plate system. An X-ray microtomography end station is installed at the white-light beamline.
The microfabrication program at CAMD is focusing on research, development and service in LIGA - a process combination of deep etch x-ray lithography with synchrotron radiation (LI), electro-forming (G German: Galvanoformung), and molding (A; German: Abformung). Close collaboration with groups form industry and research entities to develop processes, prototypes and MEMS devices is ongoing.
CAMD's microfabrication facility includes a total of four 'white light' beamlines
to conduct deep and ultra-deep X-ray lithography. Two beamlines are jointly operated
with the Institute for Micromanufacturing (IfM) at Louisiana Tech University in Ruston,
LA; One beamline is connected to the wiggler source.
Process and meterology equipment needed for this work is located within 2500 feet of Class 100 cleanroom inside the CAMD hall. CAMD's cleanroom provides LSU and other users with access to instrumentation required for the production of high aspect ratio processing, prototype development and MEMS (MicroElectroMechanical Systems) devices.
ServiceCAMD provides a cooperative work environment and state of the art processing and metrology equipment open to researchers from industries and universities. The on site staff provides the local process expertise, support in research projects as well as full service to commercial customers.
LSU and Other Louisiana Faculty
CAMD works closely with the faculty of Louisiana State University and Louisiana's other Ph.D. granting institutions to assist in the development of strong scientific and technological programs at the facility. This involvement covers a wide range of fields including chemistry, physics and all engineering disciplines.
Rather than operating as a traditional "user-facility", CAMD concentrates on developing strong long term collaborative efforts with external researchers. The Center has expanded its infrastructure and expertise through these collaborations, involving eminent national and international scientists from around the U.S., Germany, Japan and Brazil.
Richard L. Kurtz, CAMD Director
Phillip Sprunger, Scientific Director
Craig Stevens, Assistant Director for Administration